Za P-L1 - Pole-Mount Attachment; Ad653 - Pole-Mount For Pro-250H; Pro-Cmb-W - Cable Managed Bracket - Xtrails ADPRO PRO-18 Planning And Commissioning Manual

ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
The CT PRO2 consists of a transmitter connected to the RS-485 test socket in the detector
and a battery-operated receiver.
12.4 ZA P-L1 – Pole-mount Attachment
Suitable for all models. This allows the detector to be mounted on a pole.
The attachment is suitable for masts with diameter of 40-160 mm.

12.5 AD653 - Pole-Mount for PRO-250H

Especially for PRO-250H. The detector can be mounted on a mast with this special holder.
The attachment is suitable for masts with diameter of 40-160 mm.

12.6 PRO-CMB-W - Cable Managed Bracket

This robust and durable cable managed bracket can be used for all detectors (not PRO-
250H). This optional accessory offers an easy and quick solution for an efficient installation.

Hidden cabling discouraging cable vandalism

Standard compliance

Tamper protection and detection (including sealable locking screw)

Tamper switch for detection of removal from mounting surface and opening the base
junction box

Automatic tamper alarm of the detector when housing is opened or tilt (vandalism
alarm)

Field of view respectively range, sensitivity and area adaptable
Doc. 20780_03
Planning and Commissioning Manual
73