Select Detector - Xtrails ADPRO PRO-18 Planning And Commissioning Manual

ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
<F5>
<Ctrl> + <F5>
<F6>
<F7>
<F8>
<Ctrl> + <F8>
<F9>
<F10>
<Ctrl> + <K>
<Ctrl> + <P>
<Ctrl> + <V>
<Ctrl> + <A>
<Ctrl> + <O>
<Ctrl> + <M>
<Ctrl> + <T>
<Ctrl> + <D>
The following sections discuss all the actions you can perform, the available tools and how to
use them.

10.3.1 Select Detector

Before you start using the ADPRO PRO Windows® Software, you need to select the
detector to be used. The Software normally finds the detector's definition file automatically;
however, this step is performed only if there is no automatic loading.
There are two methods for selecting the detector in use in order to load its definition file and
connect it to the "IFM-485-ST" data bus.
First method:
1. Click "File",
2. Click (Open Detector INI),the following appears:
3. Select the detector,
4. Click (Open).
Second method:
1. Click "Option",
2. Click (Search Detector),the following window appears:
Doc. 20780_03
Run scope
Stop scope
Change scroll direction, "right to left" or "left to right"
Hide/ show grid
Increase signal speed
Decrease signal speed
Clear scope
Delete all triggers
Open scope window
Take picture
View picture
Picture auto
Picture memo
Open statistics window
Test
Open debugger window
Planning and Commissioning Manual
53