Accessories; Ifm-485-St - Interface Module Rs-485; Ad 851 - Alignment Telescope; Ct Pro2 - Wireless Walk Tester - Xtrails ADPRO PRO-18 Planning And Commissioning Manual

Planning and Commissioning Manual
12

Accessories

12.1 IFM-485-ST - Interface Module RS-485

The IFM-485-ST is an interface module which allows you to convieniently connect the RS-
485 bus of the detector to the USB or RS-232 bus of your computer or control panel.
Advantages
This product gives the following advantages:

Alarm management/ monitoring signal

Remote access to detector

Connection of up to 16 detectors to a data bus (maximum bus length including
'stitches': 1000 m)

For use together with security and traffic detectors from Xtralis
Requirement

PRO software (see chapter 14).

12.2 AD 851 - Alignment Telescope

This scope enables precise adjustment of the detector over denominated detection ranges of
up to 150 m.

12.3 CT PRO2 - Wireless Walk Tester

The wireless walk tester CT PRO2 enables precise adjustments of the detector over the
nominal detection range. Optical, as well as acoustic indications, plus a LED bar showing the
signal strength makes this product a 'must have' tool.
72
ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
Doc. 20780_03