Table of Contents
Advertisement
Planning and Commissioning Manual
10
Software Installation
The ADPRO PRO Windows® Software is available as an accessory to the interface module
"IFM-485-ST (formerly IF-485B)". It is used for commissioning of challenging installations,
optimizing the settings and monitoring the detector/s in use. It can be used for all types of
detectors.
The Software shows all current operation parameters and analog signals of each detector in
real time. This is useful in various situations, such as realignment of the detector, adapting
certain parameters or blanking out objects in the detection area causing unwanted alarms.
10.1 System Requirements
Before installing the ADPRO PRO Windows® Software, make sure that the following
requirements are available in the computer:
Microsoft® Windows® PC
Communication Ports: USB or RS232
10.2 Install Software
The ADPRO PRO Windows® Software installation wizard allows you to easily install the
Software by providing you with direct and easy-to-follow steps whether installation is made
on an XP or Windows 7 platform.
This section discusses how to install the Software on Windows 7 and XP platforms, in
addition to configuring the communication port.
10.2.1 Install on Windows 7 Platform
To install the Software on a Windows 7 platform, do the following:
1.
Unzip the file "Setup_PROXX.zip",
2.
Rename the file "Setup_PROXX.txt" to "Setup PROXX.exe",
3.
Double click the file "Setup PROXX.exe", a Security Warning window appears,
4.
Click (Run), a User Account Control window appears,
5.
Click (Yes), the ADPRO Setup Wizard installation wizard starts and the following
window appears:
42
ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
NOTE!
The software's name has been changed from "IF-485B" to "IFM-485-
ST"; it has the same functionality, but with the following enhancements:
Destruction of the unit due to over-voltage is avoidable.
Accidental reverse of polarity will not cause damage to the unit.
Doc. 20780_03
Hide quick links:
Advertisement
Table of Contents
