Installation; Detector Installation; Safety Instructions For Installation; Wiring - Xtrails ADPRO PRO-18 Planning And Commissioning Manual

Planning and Commissioning Manual
6

Installation

6.1

Detector Installation

6.1.1 Safety Instructions for Installation

Personnel
Work on the electrical system must only be performed by qualified electricians.
Improper Installation and Start-up
Working from Height

6.1.2 Wiring

When preparing for wiring the detectors, it is critical to follow the local wiring regulations and
apply their standards for the spacing between the various existing cables. Having the
detectors wired close to high-voltage connections affects the signals and may lead to false
alarms, inaccurate readings, etc

6.1.3 Mounting

Preparation
The mounting surface must be stable to avoid false alarms from vibrations.
24
ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
Warning!
Risk of injury through improper installation and start-up!
Improper installation and start-up can lead to serious personal injury or
property damage.
Therefore:

Be careful with open, sharp-edged components.

Before installation, ensure that the device has not been
damaged in transport.

Before installation, ensure that all transport packaging and/or
transport safety devices have been removed from the device.
DANGER!
Danger of falling down! There is acute danger, when working with
unsecured ladders. Unsecured ladders can slip and cause a fall
that can lead to serious injuries.
Therefore:

Before starting work, secure the ladder against slipping and
ensure at any time a save rest.

A secure access path to all man-carrying platforms and working
places must be ensured.

All places on which work is performed, as well as the access
paths to there, have to be illuminated in a sufficient way.

Additional information: refer to local "Safety at Work Act".
Doc. 20780_03