Normal Operation; Connection Options; Contacts; Permanent Links - Xtrails ADPRO PRO-18 Planning And Commissioning Manual

ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
11

Normal Operation

11.1 Connection Options

11.1.1 Contacts

All detectors can be connected with potential-free contacts or open collector outputs to other
systems such as:

CCTV monitoring

A burglar alarm system or

A management system
For the purposes of alarm transmission. This universal use is also guaranteed for proprietary
systems. The detectors also provide enough space for the installation of bus connection
modules of the respective systems

11.1.2 Permanent Links

If, however, detectors are continuously connected to a control centre, connection to a PC via
interface module IFM-485-ST is required. The detector must be in software operating mode.
Advantages
A continuous operation of the detector gives the following advantages:

Remote access setting (no work on a ladder, no accidental misadjustment)

Signal monitoring/ verification

Management of up to 16 detectors with a maximum bus length of 1000 m
Doc. 20780_03
Planning and Commissioning Manual
71