Transportation, Packaging And Storage; Transportation; Packaging - Xtrails ADPRO PRO-18 Planning And Commissioning Manual

Planning and Commissioning Manual
4

Transportation, Packaging and Storage

4.1

Transportation

4.2

Packaging


Packaging
The unit is packaged for normal transportation and storage conditions. All the material used
in the packaging is environmentally friendly. The packaging protects the unit from damage in
transit, corrosion and other damage. The packaging should therefore not be destroyed but
simply removed before installation.

Handling of the packaging
If the packaging is no longer needed, it must be disposed of properly in accordance with
applicable laws and local regulations.

Unpackaging
The detector is typically delivered as a standalone product together with a Quick Setup
Guide (QSG); no further documentation is included. Documentation and utilities such as the
latest version of this ADPRO PRO PIR Planning and Commissioning Manual, the ADPRO
PRO PIR data sheets, ADPRO PRO PIR brochures are available for download from the
www.xtralissecurity.com
Please unpack the detector heeding customary Electrical, Electrostatic Sensitive Device
(ESD) and safety precautions and proper grounding.
4
ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
NOTE!
To avoid damage, the unit should be transported in its original
packaging.
WARNING!
Environmental damage can be caused by improper disposal!
Packaging materials are valuable raw materials that can often be
reused or recycled, so dispose of them in an environmentally friendly
way, and comply with local disposal regulations.
Xtralis Security Solutions Support Site.
CAUTION!
Disassembling the detector can cause permanent damage and will
void the warranty.
Operating the detector outside of the specified input voltage range or
the specified operating temperature range can cause permanent
damage.
A detector contains electrostatic discharge sensitive electronics and
should be handled appropriately.
Doc. 20780_03