Commissioning - Bosch Rexroth IndraControl VAC 05.1 Instructions Manual

DOK-SUPPL*-VAC*XX.X***-IT01-EN-P
Rexroth IndraControl VAC 05.1, VAC 30.2, VAC 31.1 Connection Modules
11

Commissioning

General Information
Commissioning steps
For devices with functional safety
For commissioning the control, further parameterization or programming is
necessary.
1. Before commissioning the hand-held terminal, the operator has to en‐
sure that the plant, especially the safety devices, are in a proper condi‐
tion.
NOTICE
Before commissioning the hand-held terminal, make sure that the
EMERGENCY STOP pushbutton is not pressed.
2. Connect the 17-pin to the VAC connection module.
3. Set up the hand-held device and the connection module, see chapter
"Software" in the project planning manual of the VCH 08.1, part number:
R911320190.
Find more details about commissioning in the documentation of
the device or system manufacturer.
WARNING
The use of functional safety components does not automatically ensure a
functionally safe machine.
● Perform a risk analysis and validate the safety measures.
● Functional safety can only be guaranteed by a comprehensive imple‐
mentation of the requirements (e.g. systematic measures, software re‐
quirements, etc.) according to the applied standards (DIN EN ISO
13849 and DIN EN 62061).
Bosch Rexroth AG
Stopping of the plant due to connecting
a hand-held terminal with pressed stop
button or EMERGENCY STOP pushbut‐
ton.
Danger due to malfunctions of safety-relevant
components such as EMERGENCY STOP
pushbutton, enabling device and safety con‐
trol.
29/49
Commissioning