Technical Data - Bosch Rexroth IndraControl VAC 05.1 Instructions Manual

DOK-SUPPL*-VAC*XX.X***-IT01-EN-P
Rexroth IndraControl VAC 05.1, VAC 30.2, VAC 31.1 Connection Modules
7

Technical Data

VAC 05.1
Rated supply volt‐ DC 24 V (DC +19,2 V to DC +30 V acc. to EN 61131-2)
age (hand-held ter‐
minal), nominal
voltage U
N
Residual ripple at See project planning manual VCH 08.1
U
N
Emitted interfer‐ U = 35 V (for t < 100 ms)
max
ence and surge im‐
munity
Current consump‐ Maximum 0.7 A (depending on the connected hand-held termi‐
tion for U nal)
N
Connections
1 × Ethernet connection (RJ 45, 10/100 base-T)
Enabling device
17-pin fine thread flange, bayonet flange to the hand-held ter‐
minal
24 V power supply
Jumpering the stop Without Stop button
pushbutton circuit bridging
with unplugged
hand-held terminal
Prescribed external 2-A-fusible cut-out, time-lag
protection
Material Front panel: Aluminum, metal cover: V2A
Degree of protec‐ Front panel IP 65,
tion
Rear panel IP 30
Degree of protec‐ III acc. to EN 61131-2
tion
Fire resistance UL94-V0
Weight 220 g
Tab.7-1: Technical data
Bosch Rexroth AG
Technical Data
VAC 30.2 VAC 31.1
Stop pushbutton Stop pushbutton
Isolated contact EMERGENCY
"Terminal connec‐ STOP pushbutton
ted"
Isolated contact
"Terminal connec‐
ted"
Automatic jumper‐ Screwable short-
ing of relay con‐ circuit connector
tacts
370 g 470 g
15/49