Using The Safety Instructions; Safety Instructions - Structure; Explaining Signal Words And Safety Alert Symbol - Bosch Rexroth IndraControl VAC 05.1 Instructions Manual

DOK-SUPPL*-VAC*XX.X***-IT01-EN-P
Rexroth IndraControl VAC 05.1, VAC 30.2, VAC 31.1 Connection Modules
3

Using the Safety Instructions

3.1 Safety Instructions – Structure
3.2

Explaining Signal Words and Safety Alert Symbol

The safety instructions are structured as follows:
Safety alert symbol
Signal word
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig.3-1: Safety instructions – structure
The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and, if necessary, a safety alert symbol
(according to ANSI Z535.6-2006).
The signal word is meant to draw the reader's attention to the safety instruc‐
tion and signifies the degree of danger.
The safety alert symbol (a triangle with an exclamation point), which pre‐
cedes the signal words danger,warning and caution is used to alert the read‐
er to personal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
can occur.
CAUTION
In case of non-compliance with this safety instruction, minor or moderate in‐
jury could occur.
NOTICE
In case of non-compliance with this safety instruction, property damage could
occur.
Bosch Rexroth AG
Using the Safety Instructions
Consequences and
source of danger
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
7/49