Testing And Re-Commissioning - Bosch Rexroth M4-12 Repair Manual

Testing and re-commissioning27/32

6 Testing and re-commissioning
Before retrofitting or modifying a directional valve or a control block, tests must
be performed to ensure that the modification will not impede the function of the
application or cause it to work incorrectly.
Follow the instructions in the corresponding instruction manual.
See Table 1 "Required and supplementary documentation", on page 4.
▶ In the event of malfunctions, see the section 7 "Fault finding" on page 28.
RE 64276-01-R/10.2017, M4-12, Bosch Rexroth AG