Creating And Setting Up A Difference Calculation - FLIR E Series User Manual

12 Working with measurement tools
Follow this procedure:
1. To select the measurement tool, touch the tool on the screen. The tool is now dis-
played with one or more handles.
2. Push the navigation pad—or touch and hold the tool. This displays a context menu.
3. Use the navigation pad to select
4. Push the navigation pad. This displays a submenu.
5. Use the navigation pad to select one or more of the following:
• Select (Max) to display the maximum value.
• Select (Min) to display the minimum value.
• Select (Avg) to display the average value.
• Select (depending on the tool)
within the measurement tool
abled (Settings > Device settings > Lamp & laser > Enable lamp & laser). For more
information, see section 7.6 Measuring areas.
• Select (Max & min markers) to display the maximum and minimum markers
(the hot/cold spots).
6. Push the navigation pad to toggle the function between inactive and active:
• When the icon with the unfilled indicator
• When the icon with the filled indicator
7. When completed, push the navigation pad down to close the submenu.
8. Select (Done) and push the navigation pad.
12.7 Creating and setting up a difference
calculation
A difference calculation gives the difference between the values of two known measure-
ment results.
6. The availability of this feature is dependent on the camera model.
#T810587; r. AA/74078/74713; en-US
(Max/Min/Avg).
or (Area) to display the area of an object
6 . Area measurements require that the laser is en-
is displayed, the function is inactive.
is displayed, the function is active.
64