Flue Assembly Installation - Trane IntelliPak SAHL Series Installation, Operation And Maintenance Manual

Figure 27. Modulating 500 - 1000 MBH
Modulating Gas Valve Modulating Gas Valve

Flue Assembly Installation

1. Locate the flue assembly and the extension (refer to
2. Install the flue extension onto the flue assembly as shown in
3. Slide the pipe clamp onto the heater flue tube located inside the heater compartment.
4. Insert the tube on the flue assembly into the hole located in the vertical support for the heat
5. Butt both flue tube sections together and center the pipe clamp over joint.
6. Using the pre-punch holes in the flue assembly, extension, and the vertical support, install the
RT-SVX36G-EN
Pilot Shutoff Valve Pilot Shutoff Valve
with section of the unit.
section.
appropriate number of mounting brackets. Refer to
Burner Nozzle Burner Nozzle
Pilot Solenoid Valve Pilot Solenoid Valve
Pilot Regulator Valve Pilot Regulator Valve
Pilot Shutoff Valve Pilot Shutoff Valve
Shutoff Valve Shutoff Valve
Figure 28
Figure 28
Installation
for extension usage) in the ship
Figure 28.
for details.
61