Trane IntelliPak SAHL Series Installation, Operation And Maintenance Manual page 32

Installation
Unit Clearances
Figure 8
unit installation. These clearances are the minimum distances necessary to assure adequate
serviceability, cataloged unit capacity, and peak operating efficiency.
Providing less than the recommended clearances may result in condenser coil starvation, "short-
circuiting" of exhaust and economizer airflows, or recirculation of hot condenser air.
Unit Dimensions & Weight Information
(a) Weights shown represent approximate operating weights. Actual weights are stamped on the unit nameplate.
32
illustrates the minimum operating and service clearances for either a single or multiple
Description
Unit dimensions, 20-75 Ton (SAHL)
Unit dimensions, 90-130 Ton
Typical unit and operation weights
Center-of-Gravity illustration and related
dimensional data
Unit dimensions, 20-89 Ton
(SEH_, SFH_, SLH_, SSH_, and SXH_)
Typical unit and operation weights
Center-of-Gravity illustration and related
dimensional data
Air-Cooled Condenser
Figure 9, p.
Evaporative Condenser
Figure 10, p.
Table 8, p.
(a)
Reference
34, Table 4, p. 34, Table 5,
and Table 6, p. 35,
Figure 12, p. 40
Table 12, p. 42
Figure 13, p. 41
36, Table 7, p. 36,
37, and Table 9, p. 39
Table 13, p. 43
Figure 13, p. 41
RT-SVX36G-EN