HunterLab LabScan XE Supplemental Manual page 9

LabScan XE Supplemental Manual for EasyMatch QC
i. Option #1: Key ID.
This method is for copying the ID from an email or writing down the 32-digit code.
This requires an internet connection.
a. From the Choose an Option page (Figure 5), select Key ID.
b. Paste-in or type-in the License Key ID and click Activate.
c. An acknowledgement will be displayed showing the activation status.
ii. Option #2: Key File (.skl)
This method is for using the SoftKey License (.skl file) on the thumb drive.
a. Place the thumb drive with the SoftKey License in the USB port.
b. From the Choose an Option page (Figure 5), select Key File (.skl).
c. Browse the USB to find the SoftKey License (.skl) file, then click Activate.
d. An acknowledgement will be displayed showing the activation status.
iii. Option #3: Sentinel Key
a. If the user has a HunterLab USB hardware key, then it can be used with a
new sensor on the same computer. Return to Install the Software, Step 5
(Figure 7) and select the Sentinel Key to continue.
iv. Option #4: 30-day trial
a. Fill out the registration form provided for the 30-day trial. Connect to the
internet. HunterLab will approve the trial and email the SoftKey license back.
Follow the directions for Option #1 or #2 to complete.
Figure 7. Activate License
9