Labscan Xe Features; Indicator Lights - HunterLab LabScan XE Supplemental Manual

Full-scanning spectrocolorimeter

Hide thumbs Also See for LabScan XE:

Table of Contents

The LabScan XE is a full-scanning spectrocolorimeter with a wavelength range from 400 to 700

nanometers (nm). It is designed for use with the sample port facing up or forward. It can also be used

port-down with an optional stand.

The sample is illuminated by a xenon flash lamp and reflected light is collected by a 15-station fiber

optic ring. For maximum stability, the instrument is automatically standardized to an internal

reference tile whenever measurements are made. The picture below shows the instrument in the

port-up configuration.

Indicator

Note: Use of this equipment in a manner not specified by the manufacturer may impair the

The LabScan XE's indicator light feature lets you know what mode of standardization is currently in use.

There is also an "In progress" light next to the indicator lights that flashes when a reading is in progress

or a motor is in motion.

LabScan XE Supplemental Manual for EasyMatch QC

LabScan XE Features

lights

Figure 1. Photo of LabScan XE

protection afforded by the equipment

Figure 2. Indicator Lights

Port plate

Macro button

Retroviewer

(optional)

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the LabScan XE and is the answer not in the manual?