Table of Contents
Advertisement
6 Settings
Fig.19
Tab.7
Parameter
Adjustment range
AUTOMATIQUE
DAY
7/7, xx:xx
NIGHT
7/7, xx:xx
HOLIDAYS
7/7, 1 to 364
SUMMER
MANUEL
FORCE AUTO
ON/ OFF
(2)
(1) The start and end days and the number of days are calculated in relation to each other.
(2) The parameter is only displayed if a room sensor is connected.
Fig.20
20
AFC
1. Press the MODE key.
2. To select the desired parameter, turn the rotary button.
3. To modify the parameter, press the rotary button.
To go back to the previous display, press the
4. To modify the parameter, turn the rotary button.
5. To confirm, press the rotary button.
MODE
MW-C002267-1
MODE menu
Description
The comfort mode ranges are determined by the timer pro
gramme.
Comfort mode is forced until the time indicated or all the time
(7/7).
Reduced mode is forced until the time indicated or all the time
(7/7).
The frost protection mode is active on all boiler circuits.
Number of days' holiday: xx
Stop heating: xx:xx
Start heating again: xx:xx
The heating is off.
Domestic hot water continues to be produced.
The generator operates according to the set point setting. All
of the pumps operate. Possibility of setting the set point by
simply turning the rotary button.
An operating mode override is activated on the remote control
(optional).
To force all circuits to run on AUTOMATIQUE, select ON.
6.1.3
To force domestic hot water production, proceed as follows:
1. Press the
2. To select the desired parameter, turn the rotary button.
3. To modify the parameter, press the rotary button.
To go back to the previous display, press the
4. To modify the parameter, turn the rotary button.
5. To confirm, press the rotary button.
MODE
MW-C002268-A
Important
To cancel, press the
key.
(1)
(1)
(1)
Forcing domestic hot water production
key.
Important
To cancel, press the
key.
key.
Factory setting
Current time + 1
hour
Current time + 1
hour
Current date + 1
day
key.
300026440 - v06 - 07082018
Advertisement
Table of Contents
