IOGear GCS1932H User Manual page 9

Components
GCS1932H Front View
GCS1934H Front View
No. Component
1 Port Selection
Pushbuttons
2 Port LEDs
3 Audio Port
4 USB 3.1 Gen 1
Peripheral Port
Description
For manual port selection (see Port Switching)
•
Press a button for less than 2 seconds to bring the KVM, USB and Audio focus to the
computer of the corresponding port
•
Press a button for longer than 2 seconds to bring only the KVM focus to the computer
of the corresponding port
•
Press a button twice to bring the audio focus to the computer of the corresponding
port
•
Press button 1 and 2 simultaneously for 2 seconds to start Auto Scan Mode
•
For GCS1934H only, press button 3 and 4 simultaneously for 2 seconds to start
Keyboard/Mouse reset
The Port LEDs are built into the Port Selection Pushbuttons. The upper LEDs are KVM
Port LEDs, the lower LEDs are the USB LEDs:
KVM
•
DIM ORANGE – computer of the corresponding port is connected (Online)
•
BRIGHT ORANGE – computer of the corresponding port is on focus (Selected)
•
FLASHES – computer of the corresponding port is under Auto Scan Mode
USB
•
GREEN – computer of the corresponding port has USB focus
AUDIO
•
GREEN – computer of the corresponding port has Audio focus
Speakers connected to these main audio ports will have priority over ones connected to
rear panel
USB peripheral (printer, scanners, drivers, etc) connected to these ports will be shared
amongst connected computers
9