IOGear GCS1932H User Manual page 17

Note
1. The [n] stands for the number of seconds that the GCS1932H/GCS1934H should
dwell on a port before moving on to the next port. Replace [n] with a number between
1 and 99 when entering this hotkey combination.
2. While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are
suspended – only Auto Scan Mode compliant keystrokes and mouse clicks can be
input. You must exit Auto Scan Mode in order to regain normal control of the console
3. Although the video focus switches from port to port, the keyboard, mouse, and USB
focus do not switch. They stay at the port they were on when Auto Scanning started
4. To exit Auto Scan Mode, press [Esc] or [Spacebar]
Hotkey Setting Mode (HSM)
All hotkey operations begin by invoking HSM:
1. Press and hold down [Num Lock]
2. Press and release [-]
3. Release [Num Lock]
Alternative key combination below can be used to invoke HSM, please see Alternate HSM
Invocation keys for more details.
When HSM is active, Caps Lock and Scroll Lock LEDs flash in succession. They will stop
flashing and revert to normal status when existing HSM.
While on HSM, ordinary keyboard and mouse function are suspended – only Hotkey
compliant keystrokes and mouse clicks can be input
To exit HSM manually, press [Esc] or [Spacebar]
Alternative HSM Invocation Keys
An alternative set of HSM invocation keys can be used in case the default set conflicts with
programs running on the computers
To switch to alternate HSM invocation set:
1. Invoke HSM
2. Press and Release [H] The HSM invocation keys become [Ctrl] instead of [Num Lock]
and [F12] instead of [-]
This procedure is a toggle between the two methods. To revert to the default HSM
invocation keys, invoke HSM then press and release [H] again.
17