Table of Contents
Advertisement
Hardware Installation
Please read Safety Instructions before proceeding with installation
Please make sure that all devices including the GCS1932H/GCS1934H, HDMI monitor,
and computers are powered OFF
1. To prevent damages from power surges or static electricity, ground the KVM
by connecting one end of a grounding wire (grounding wire not included) to the
grounding terminal and the other end to a suitable grounded object. Please also make
sure that the computers and devices connected are also properly grounded.
2. Connect the USB keyboard and the USB mouse to the GCS1932H/GCS1934H
Console ports located on the rear side panel
3. Connect the HDMI monitor to the GCS1932H/GCS1934H Console HDMI port located
on the rear side panel
4. Turn HDMI monitor power to ON
5. Connect main speakers into the GCS1932H/GCS1934H speaker jacks located on the
front side panel (optional). Speakers connected into this front port have priority over
those connected on the rear port of GCS1932H/GCS1934H
6. Connect secondary speakers into the GCS1932H/GCS1934H Console speaker jacks
located on the rear panel (optional).
7. Using the provided cables from IOGEAR,
○ Connect the provided HDMI connector into any available HDMI port in the KVM
Port section of the GCS1932H/GCS1934H
○ Connect the provided USB and speaker connector into their corresponding USB
and speaker ports on the GCS1932H/GCS1934H
○ Connect the other end of the KVM cables into their respective HDMI, USB, and
speaker ports on the computers
8. Plug up to two USB peripherals into the USB type A ports in the USB3.1 Gen 1 hub
section (front and rear panel of the GCS1932H/GCS1934H)
9. Connect the provided power adapter to an AC power source. Then, connect the
power adapter cable into the GCS1932H/GCS1934H power jack.
10. Turn all connected computers power to ON
Note
Verify that all the connectors are on the same KVM Port sockets (all in Port 1, all in Port
2, etc.) and that each socket is marked with an appropriate icon to indicate itself
We recommend that the total cable length from PC to the monitor (including the
GCS1932H/GCS1934H) does not exceed 20 feet and the GCS1932H/GCS1934H to be
powered ON at all times.
11
Advertisement
Table of Contents
