IOGear GCS1932H User Manual page 18

Alternate Port Switching Keys
An alternate way of activating port switching is by pressing [Ctrl] key twice instead of [Scroll
Lock]. To use the alternate port switching hotkeys:
1. Invoke HSM
2. Press and release [T]
This procedure is a toggle between the two methods. To revert to the default port switching
method, invoke HSM and press and release [T] again
Default EDID Mode
EDID feature eliminates monitor compatibility issue. To enable/disable EDID mode"
1. Invoke HSM
2. Press [V] [Enter]
This procedure is a toggle between the two methods. To revert to the default port switch-
ing method, invoke HSM and press and release [V] [Enter] again
Buzzer Control
To turn on or off buzzer:
1. Invoke HSM
2. Press and release [B]
This procedure is a toggle between the two methods. To revert to the default port switch-
ing method, invoke HSM and press and release [B] again
Firmware Upgrade Mode
To enter firmware upgrade mode:
1. Invoke HSM
2. Type in [U][P][G][R][A][D][E]
3. Press [Enter]
The front panel LEDs will flash, indicating that Firmware Upgrade Mode is in effect.
Please see Firmware Upgrade Mode for more details. Power the GCS1932H/GCS1934H
off to exit from Firmware Upgrade Mode
Hotkey Port Switching
To enable or disable hotkey port switching:
1. Invoke HSM
2. Press [X][Enter]
This procedure is a toggle between the two methods. To revert to the default port switch-
ing method, invoke HSM and press and release [X][Enter] again
When disabled, port switching hotkeys [Scroll Lock][Scroll Lock] and [Ctrl][Ctrl] will not
work
18