Wiring Cable - IAI ROBO Cylinder RCS2 Operating Manual

8.

Wiring Cable

• In an application where the cable cannot be anchored, try to place the cable so that it sags only under
its own weight or use self-standing type cable as large radial wire duct to limit the load on the cable.
• Never cut and/or reconnect the cables supplied with the product for the purpose of extending or
shortening the cable length.
•
The standard cable provides excellent flexibility, but it is not a robot cable. Use a robot cable if the
cable is to be stored in a moving cable duct (cable bearer, etc.).
For cable modification, please contact IAI.
11