Introduction; Scope Of Delivery; Latest Information - Siemens SENTRON 7KM Product Manual

Pac expansion module

Hide thumbs Also See for SENTRON 7KM:

Table of Contents

Introduction

1.1

Included in package:

• 1 x 7KM PAC expansion module I(N), I(Diff), analog

• 1 x operating instructions

1.2

Up-to-the-minute information

You can find further support on the Internet:

Website (https://support.industry.siemens.com/my/ww/en/requests)

General safety information

Hazardous voltage

Will cause death or serious injury.

Turn off and lock out all power supplying this equipment before working on this device.

Note

Only qualified personnel are allowed to install, commission or service this device.

• Wear the prescribed protective clothing.

• Observe the general equipment regulations and safety regulations for working on high-

voltage installations (e.g. DIN VDE, NFPA 70E) as well as national or international

regulations.

• Check that all connections are correctly made before startup.

• Before power is applied to the device for the first time, it must have been located in the

operating area for at least two hours in order to reach temperature balance and avoid

humidity and condensation.

• The limits given in the technical data must not be exceeded even during commissioning or

testing.

• Condensation on the device is not permissible during operation.

Equipment Manual, 05/2020, L1V30408520AG-03

DANGER

Table of Contents