Installation
3.1
Installation location
Hazardous voltage
Using devices when they are damaged may result in death, serious injury, or property
damage.
The expansion module is inserted in the appropriate slot labeled "MOD1" or "MOD2" on the
rear panel of the SENTRON 7KM PAC measuring device.
Note
Only one expansion module of the type I(N), I(Diff), analog may be connected to the PAC
measuring device.
NOTICE
Condensation may cause the device to malfunction.
The device must be in the operating environment for at least two hours before use to
prevent condensation due to sudden temperature changes.
Equipment Manual, 05/2020, L1V30408520AG-03
WARNING
3
13