Page 1
OI R M BU MÁ E OU CIÓ RÉ À PO IL IS IL E . NE ÉR L' HU T EN DI ÉS E L'A For the Hotsy Dealer nearest you, consult our web page at www.hotsy.com 8.921-206.0-B 5/31/17...
NOTE: The manual part number is located on the The model and serial number of your machine is lower right corner of the front cover. located on the back of the machine. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
When ordering parts, please specify model and serial number. Use only identical replacement parts.This machine is to be used only by trained operators. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
EAR PROTECTION Always disconnect power before servicing. MUST BE WORN WARNING: Flammable liquids can create fumes which can ignite, causing property damage or severe injury. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
Page 7
21. Do not operate this machine when fatigued or OR SEVERE INJURY severe injury or death will result. under the influence of alcohol, prescription medica- TO PERSONS. KEEP CLEAR OF NOZZLE. tions, or drugs. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
Page 8
NOT SUITABLE FOR CONNECTION TO THE POTABLE WATER MAINS. Follow the maintenance instructions specified in the manual. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
L 51” X W 28” X H 52” 760 Lbs 760 Lbs 8” L 51” X W 28” X H 52” 765 Lbs 765 Lbs 8” L 51” X W 28” X H 52” Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
LI S E À S AJ U IL U TI L' H ÉR S EL T EN D IÉ E L'A 89212070-12 High Pressure Hose Garden Hose (not included) Hose Reel Bracket Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
Page 11
GFCI — Provided on all single phase machines. Trips when there is current leakage. Hose Reel Bracket — Mounts optional hose reel. Relief Valve — Ruptures when pressure exceeds 7000 psi. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
1. Use teflon tape on plumbing connections to prevent leakage. 2. Install pressure hose on machine as shown. Relief Valve Pressure Hose NOTE: The safety relief valve must be inspected and tested annually. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
Page 13
STEP 8: Fill fuel oil tank. Do not STEP 7: Check oil level by using confuse gasoline and fuel oil tanks. supplied dip-stick. Use SAE 10W- Keep proper fuel in proper tank. 40 non-detergent only. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
Bacharach scale. For additional burner component information, see Burner Assembly Exploded View page. It is recom- mended that the oil burner be serviced yearly or as needed. Contact your local service center. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
WARNING: To reduce the risk of electrocution, keep all connections dry and off the ground. DO NOT touch plug with wet hands. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
2. Turn ON water supply. 3. Hold wand firmly, release trigger of trigger gun and turn pump switch ON. Squeeze trigger of trigger gun and allow air to purge from system. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
Page 17
Rinse from the top to the bottom to prevent detergent from dripping onto a rinsed area. For the best results, contact your Hotsy dealer to help you select the best detergent for your application. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
Page 18
NOTE: For a more gentle rinse, select the white 40° nozzle. To scour the surface, select the yellow 15° or red 0° nozzle. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
When the water reaches this temperature, the pump protector engages and cools the pump by discharging the warm water onto the ground. This thermal device prevents internal damage to the pump. Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
IMPORTANT: Machine must be stored indoors. permanently lubricated bearings and will not require additional lubrication. Pump Use Hotsy Pump Oil (8.923-422.0) or equivalent 10W- Relief Valve WARNING: The relief valve on this pressure washer non-detergent oil for pump crankcase. Crankcase must...
Call local dealer ONLY WHEN BURNER IS OFF Misaligned electrode setting Realign electrodes to specifications Check for insulation blockage or other Obstruction in smoke stack foreign objects Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B...
Page 23
IMPORTANT If the pressure washer demonstrates other symptoms or the corrective actions listed do not correct the problem, contact the local authorized Hotsy Service Center. The Hotsy Service Center can be identified by visiting www.hotsy.com. IMPORTANT When ordering from your dealer, please provide the following:...
Page 24
If you need SERVICE on your pressure washer, contact your local Hotsy dealer or visit www.Hotsy.com. Smart phone users scan the code below to link directly to the Service Request page. To REGISTER your pressure washer, please visit our Warranty Registration page at www.hotsy.com/WarrantyRegistration.aspx or scan the code...