Mower's Intended Use; Technical Data - SaMASZ KBRP 160 Operating Manual

3. MOWER'S INTENDED USE

The rear flail mower mounted on a pantograph is intended for mowing road shoulders, lots,
greens, ditches and such, for breaking up branches of moderate thickets (up to 10 cm), weeds and
such, and in agriculture for mulching corn, tobacco stubble and not too high grasses under good
conditions in flat slightly hilly areas.
WARNING:
It is forbidden to use the mower for purposes other than those listed in
this instruction. Using the mower for other purposes will be classified
as use not according with the intended use and could exclude
the manufacturer from responsibility from any resulting damages.
The mower should be used, serviced and repaired only by persons
familiar with its characteristics and with safety regulations.
Unauthorized modification of the mower may release the manufacturer
from responsibility for any resulting malfunctions or damages.
The KBRP 160 mower should be used with class II tractors with 70 HP
The KBRP 200 mower should be used with class II tractors with 80 HP

3.1. Technical data

Tab. 1. Technical data
Mowing width
Working capacity
Hedge mowing
Road shoulder mowing
Number of blades (flails)
Tractor PTO rpm
Tractor power
PTO
Transport width
Height
Weight
Tractor class
Operating manual
Mower type:
- 3 -
Rear flail mower on a pantograph
KBRP 160; KBRP 200
of power.
of power.
KBRP 160 KBRP 200
1.60 m 2.00 m
1.0 ha/h 1.6 ha/h
0- 96° 0-96°
0-60° 0-60°
14 pcs. 16 pcs.
540 rpm 540 rpm
from 70 HP from 80 HP
840 840
1650 mm 1650 mm
2300 mm 2700 mm
760 kg 820 kg
II II