Install The Drive - YASKAWA GA500 Series Installation Manual

◆

Install the Drive

Tightly push the drive against the metal surface (enclosure panel) and make sure that you
apply the thermal compound over the full heatsink plate of the drive.
Clean off the unwanted thermal compound from around the drive perimeter.
A - Metal surface (enclosure panel)
B - Heatsink plate
C - Screw
Note:
You can mill the metal surface to be more flat and use less thermal compound. Recommended flatness is
0.05 mm (0.00197 in) or less. After you mill the metal surface, tightly push the drive against it.
YASKAWA TOEP C710617 0SA YASKAWA AC Drive GA500 Installation Manual
D - Finless-type drive
E - Thermal compound
Figure 5.4 Install the Drive
5 Conditions
17