Safety Instructions; Required Background Knowledge - IFM io-key Operating Instructions Manual

io-key
2

Safety instructions

Content
General ..................................................................................................................................................... 6
IT security ................................................................................................................................................. 6

Required background knowledge ............................................................................................................. 6

>
2.1 General
•
The device described is a subcomponent for integration into a system. The manufacturer is
responsible for the safety of the system. The system manufacturer undertakes to perform a risk
assessment and to create documentation in accordance with legal and normative requirements to
be provided to the operator and user of the system. This documentation must contain all
necessary information and safety instructions for the operator, the user and, if applicable, for any
service personnel authorised by the manufacturer of the system.
•
Read this document before setting up the product and keep it during the entire service life.
•
The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
•
Only use the product for its intended purpose (→
•
If the operating instructions or the technical data are not adhered to, personal injury and/or
damage to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering
with the product or incorrect use by the operator.
•
Installation, electrical connection, set-up, programming, configuration, operation and maintenance
of the product must be carried out by personnel qualified and authorised for the respective activity.
•
Protect units and cables against damage.
>
2.2 IT security
NOTICE!
If the device is operated in an unprotected network environment:
>
Unauthorised read or write access to data is possible.
>
Unauthorised manipulation of the device function is possible.
► Check and restrict access options to the device.
>
2.3 Required background knowledge
This document is intended for specialists. Specialists are people who, based on their relevant training
and experience, are capable of identifying risks and avoiding potential hazards that may be caused
during operation or maintenance of the product.
The document contains information about the correct handling of the product.
6
Bestimmungsgemäße
28333
58525
Verwendung).
58235
34185