Kcp Interface Commands; Data Transfer Functions; Data Transfer After Pressing The Print <Manual> Button; Continuous Data Transfer <Cont - KERN CKE 6K0.02 User Manual

12.3 KCP interface commands

The detailed description can be found in the KERN Communication Protocol manual,
available in the Download Center on the home page of KERN.

12.4 Data transfer functions

12.4.1 Data transfer after pressing the PRINT <manual> button
Function enabling:
 In the setup menu, display the <Print PrMode> menu item and confirm,
pressing TARE.
 To transfer data manually, using navigation buttons , choose the <manual>
menu item.
 Confirm, pressing TARE.
 Return to the weighing mode, pressing ON/OFF button.
Placing the weighed material:
 Whenever required, place an empty vessel on the scales and tare it.
 Place the weighed material and wait until the stabilization indicator is displayed (
). The weighing value will be transferred after PRINT button is pressed.
 Remove the weighed material.
12.4.2 Continuous data transfer <cont>
Function enabling and transfer cycle setting:
In the setup menu, display the <Print PrMode> menu item and con-

firm, pressing TARE.
 To transfer the data continuously, using the navigation buttons , select the
<cont> menu item.

Confirm with TARE; the <interv> symbol will be displayed.
 Confirm by pressing TARE and using the navigation buttons, , set the re-
quired cycle
see chapter 3.2.2).
Placing the weighed material:
 Whenever required, place an empty vessel on the scales and tare it.
 Place the weighed material.
 The weighing values will be transferred in line with the predefined cycle.
32
in miliseconds, (for introducing the numerical value,
CKE-BA-e-2031