Disassembly Instructions - Icom IC-M220 Service Manual

SECTION 3
1. REMOVING THE FRONT PANEL
1) Remove the 4 screws from the case.
2) Separate the front panel from the case.
BE CAREFUL about the flat cable when separating the
front panel from the case.
3) Disconnect the flat cable from the LOGIC UNIT.
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT

DISASSEMBLY INSTRUCTIONS

Case
Case
Case
Case
Case
Screws ×4
Screws ×4
Screws ×4
Screws ×4
Screws ×4
Front panel
Front panel
Front panel
Front panel
Front panel
Case
Case
Case
Case
Case
Front panel
Front panel
Front panel
Front panel
Front panel
J1
J1
J1
J1
J1
Flat cable
Flat cable
Flat cable
Flat cable
Flat cable
Case
Case
Case
Case
Case
2. REMOVING THE LOGIC UNIT
1) Unsolder the 2 points of the speaker cables, and
disconnect the flat cable from the LOGIC UNIT.
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT
2) Remove the 5 screws, and then remove the LOGIC
UNIT and the earth spring from the front panel.
Earth spring
Earth spring
Earth spring
Earth spring
Earth spring
3-1
Speaker cables
Flat cable
Speaker cables
Speaker cables
Speaker cables
Flat cable
Flat cable
Flat cable
Speaker cables
Flat cable
J2
J2
J2
J2
Front panel
J2
Front panel
Front panel
UNSOLDER
Front panel
UNSOLDER
UNSOLDER
Front panel
UNSOLDER
Solder
remover
UNSOLDER
Solder
Solder
Solder
remover
remover
remover
Solder
remover
Screws ×5
Screws ×5
Screws ×5
Screws ×5
Screws ×5
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT
LOGIC UNIT
Front panel
Front panel
Front panel
Front panel
Front panel