Pc Cpu Configuration -44; Brief Description; Technical Data; Electrical Specifications - Bosch Rexroth MTA 200 Planning Manual

Project Planning Manual | Rexroth MTA 200
7

PC CPU Configuration -44

7.1

Brief Description

7.2

Technical Data

7.2.1

Electrical Specifications

Voltage supply
Power consumption
Battery
7.2.2

CPU and Memory Specification

Processor
CPU Clock Rate
System Clock Rate
Fig.7-1: Slot CPU card
The NC has the same appearance as the PC CPU described in
CPU Configuration -45" on page 65
-55" on page 75. However, it contains a different processor and memory module
and a different BIOS setting. The peripherals contained on the card for HD/FD,
serial interface and Ethernet are not used and are disabled via BIOS.
+5, +12 V (+/- 3%)
10-20 W typically (depending on the processor type)
+3.6 volt lithium battery, size ½ AA)
Fig.7-2: Electrical specifications
INTEL, Mobile Pentium III min. 400 MHz
Min. 400 MHz
100 MHz frontside bus
Electric Drives | Bosch Rexroth AG
and Controls
PC CPU Configuration -44
und chapter 6 "PC CPU Configuration
83/135
chapter 5 "PC