Temporary Connection Of Further Ide Devices; General Information; Connection For The Power Supply Cable - Bosch Rexroth MTA 200 Planning Manual

Project Planning Manual | Rexroth MTA 200
5.5

Temporary Connection of Further IDE Devices

5.5.1

General Information

5.5.2

Connection for the Power Supply Cable

It is possible to connect further IDE devices to the BTV 20.4 without changing
the cabling of the internal HDD. The following figure shows the connection for
the power supply cable and the IDE port:
Fig.5-24: Position of the temporary connections
To provide power to the IDE device an additional external voltage source is to
be connected to the slot CPU card. To do so, use a standard power supply
cable for 5.25" PC drives.
The pin assignment is as follows:
Fig.5-25: Connection for the power supply cable
PIN Color
1 Yellow orange
2 Black
3 Black
4 Red
Fig.5-26: Pin assignment
Electric Drives | Bosch Rexroth AG
and Controls
PC CPU Configuration -45
Meaning
+12 V
GND
GND
+5 V
73/135