Bosch Rexroth MTA 200 Planning Manual page 37

Project Planning Manual | Rexroth MTA 200
Internal keyboard
Fig.4-14: "Input" tab
This method is used for adding a keyboard layout, i.e. several keyboard lan‐
guages are displayed in the window and the desired language is to be selected.
Use the "Properties" button in the input tab of the control panel to set the key‐
board layout directly to the desired language.
However, after the change only the changed keyboard is displayed
in the window. You cannot choose between the old and new key‐
board layout, as it is the case when the "Add" button is used.
For adapting the internal foil keyboard the additional "BTV 20" icon is available
in the Windows NT control panel. Do the following steps:
1. Call the "BTV 20" entry in the Windows NT control panel.
Path: Start - Settings - Control Panel - BTV 20
Electric Drives | Bosch Rexroth AG
and Controls
Machine Operator Terminal BTV 20.4A
35/135