Application Example With Bta 10/20 And Btc 06 Hand-Held Terminal - Bosch Rexroth MTA 200 Planning Manual

Project Planning Manual | Rexroth MTA 200

Application Example with BTA 10/20 and BTC 06 Hand-held Terminal

Fig.4-43: Device arrangement
The BTA 20 is to be connected directly to the X16 connector of the used PLC
module via the IKB0015 cable.
Only RS422 communication can be established between the devi‐
ces.
Further notes regarding the connection of the BTC 06 hand-held terminal are
in chapter 9 "PLC Modules MTS-P01.2 and MTS-P02.2" on page
Electric Drives | Bosch Rexroth AG
and Controls
Machine Operator Terminal BTV 20.4A
51/135
107.