Wireless 5G Repeater - BEC 4700A User Manual

Wireless 5G Repeater

Use the BEC 4700A/AZ as a repeater to extend the wi-fi signal of the primary AP.
Manually Fill-in
SSID: Enter the SSID of the primary AP.
Security Type: Enter the Wi-Fi security type of the primary AP.
WPA Algorithms: Enter the WPA algorithms of the primary AP.
Pre-Shared Key: Enter the Wi-Fi password/pre-shared key of the primary AP.
Automatically
Scan: Click to view all other available Wireless-AP devices near the BEC 4700A/AZ. Select the
desired AP you wish to extend the signal.
 CH (Channel): Channel ID used.
 SSID: The name of the wireless AP.
 BSSID: The MAC address of the wireless AP.
 Security: The security mode in the wireless AP.
 Signal (%): Signal strength of the wireless AP. Signal increases means the wireless AP is
closer to your BEC 4700A/AZ and may cause interferences.
Click Save to apply settings.
BEC 4700A / 4700AZ User Manual
Interface Setup – Wireless 5G Repeater
Device Configuration
90