BEC 6800RUL User Manual
  1. Manuals
  2. Brands
  3. BEC Manuals
  4. Wireless Router
  5. 6800RUL
  6. User manual

BEC 6800RUL User Manual

4g/lte outdoor router
Hide thumbs Also See for 6800RUL:
Table of Contents

Advertisement

Quick Links

Download this manual
BEC 6800RUL
4G/LTE Outdoor Router

User Manual

Last revised: Nov. 2015
Version release: v1.4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6800RUL and is the answer not in the manual?

Questions and answers

Related Manuals for BEC 6800RUL

Summary of Contents for BEC 6800RUL

  • Page 1: User Manual

    BEC 6800RUL 4G/LTE Outdoor Router User Manual Last revised: Nov. 2015 Version release: v1.4...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS ........2 CHAPTER 1: INTRODUCTION ........1 .............. 1 NTRODUCTION TO YOUR OUTER & S ..............2 EATURES PECIFICATIONS ..............3 ARDWARE PECIFICATIONS ................3 PPLICATION IAGRAM CHAPTER 2: PRODUCT OVERVIEW ......4 ..........4 MPORTANT OTE FOR SING...
  • Page 3 ....................28 TATUS ..................29 UICK TART WAN ....................31 CHAPTER 5: ADVANCED CONFIGURATION ....32 ................. 32 OGIN TO YOUR EVICE ....................34 TATUS Mobile Status ....................35 ARP Table ......................36 DHCP Table ...................... 36 System Log ...................... 37 Firewall Log .....................
  • Page 4 Port Mapping ....................... 69 DMZ ..........................71 Time Schedule ....................73 ..................74 DVANCED Static Route ........................74 Static ARP ........................74 Dynamic DNS ........................ 75 Device Management ....................76 SIP_ALG ........................83 IGMP ..........................83 SNMP Access Control ....................84 TR-069 Client ........................

  • Page 5: Chapter 1: Introduction

    With multiple mounting options and a light weighted, it is easily to install the 6800RUL by single person. The 6800RUL also has a built-in passive Power of Ethernet (PoE) so both data and power can be sent from the unit.

  • Page 6: Table Of Contents

    • Remote access control for web base access • IP, MAC, and URL filtering • Password protection for system management • VPN pass-through Quality of Service Control • Supports the DiffServ approach • Traffic prioritization based-on IP protocol, port number and address BEC 6800RUL User Manual...

  • Page 7: Hardware Specifications

    • SIM slot: (for the SIM card from Telco / ISP) • LED Indicators: Power, LAN (PoE), Boot, LTE, and Internet Physical Specifications • Dimensions (W*H*D): 8.5" x 7.5" x 3"(257mm x 227mm x 91mm) • Weight: 2.75kgs (6.06lbs) • IP-67 Grade Enclosure Application Diagram BEC 6800RUL User Manual...

  • Page 8: Chapter 2: Product Overview

    Use the supplied PoE (Power-over-Ethernet) injector for indoor only or with any 802.3at capable PoE injectors to connect with BEC 6800RUL  It is mandatory to earth ground the BEC 6800RUL. Improper grounding not only could damage the unit but also all eqiupments connected to it. Attention Package Contents ...

  • Page 9: Device Description

    3. Boot LED Lit green means system boot up successfully. 4. LTE Lit green when 4G/LTE service is ready to precede the dial-up. 5. Internet Lit green when Internet is available. BEC 6800RUL User Manual...

  • Page 10: Mounting Instructions

    Product Overview Mounting Instructions Attach the Articulation Pole to the Enclosure Attach the articulation pole to the back of the BEC 6800RUL using M6*16 screws and washers. A -45 or +45 degree adjustment Dual-Polarized Antenna Cross-Polarized Antenna Mounting on Wall or a Pole 2.1 Mounting on Wall...

  • Page 11: Product Overview

    Attach the articulation pole to the T-formed bracket by using M8x40 bolts, nut, spring washer and washer. Dual-Polarized Antenna – The original of the source position, the nominal position, is seeing BEC logo when facing toward the 6800RUL, BEC 6800RUL User Manual...
  • Page 12 Product Overview Cross-Polarized Antenna – From the nominal position, adjusting and rotating the 6800RUL -45 or +45, anticlockwise or clockwise, degree angle. Position Adjustment Find the location and best angle for getting the strongest signal from the base station. The CPE must be directed towards the nearest base station.
  • Page 13 A-D, and then connect the RJ-45 Ethernet cable into the CPE port. Step 3: ○ ○ 3.1: Insert C at the back end of ○ ○ 3.2: clip B on ○ ○ 3.3: keep B close to ○ 3.4: then tighten BEC 6800RUL User Manual...
  • Page 14 LTE router. IMPORTANT: It is recommended to put the PoE Injector on an UPS or Surge Protector. Use the supplied grounding wire to ground your 6800RUL ODU is REQUIRED! 6. Set up your LTE Internet Connection Step 1: Unscrew the cap of SIM card slot.
  • Page 15 IMPORTANT: It is recommended to use an industrial grade SIM card. Step 3: Screw the cap back tightly. Please power off the device before inserting or removing the SIM card. Warning BEC 6800RUL User Manual...

  • Page 16: Chapter 3: Basic Installation

    If not, please refer to your Windows-related or other operating system manuals. Any TCP/IP capable workstation can be used to communicate with or through the BEC 6800RUL. To configure other types of workstations, please consult the manufacturer’s documentation. BEC 6800RUL User Manual...

  • Page 17: Network Configuration - Ipv4

    Then click on Network and Internet. When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel. Select the Local Area Connection, and right click the icon to select Properties. BEC 6800RUL User Manual...
  • Page 18 In the TCP/IPv4 properties window, select the Obtain an IP address automatically Obtain Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration. BEC 6800RUL User Manual...

  • Page 19: Configuring Pc In Windows Vista (Ipv4)

    Center at the top bar. When the Network and Sharing Center window pops up, select and click Manage network connections on the left window pane. Select the Local Area Connection, and right click the icon to select Properties. BEC 6800RUL User Manual...
  • Page 20 Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration. BEC 6800RUL User Manual...

  • Page 21: Configuring Pc In Windows Xp (Ipv4)

    3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. BEC 6800RUL User Manual...

  • Page 22: Configuring Pc In Windows 2000 (Ipv4)

    3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. BEC 6800RUL User Manual...

  • Page 23: Configuring Pc In Windows 98/Me

    Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration. BEC 6800RUL User Manual...

  • Page 24: Configuring Pc In Windows Nt4.0

    1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. BEC 6800RUL User Manual...

  • Page 25: Network Configuration - Ipv6

    Then click on Network and Internet. When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel. Select the Local Area Connection, and right click the icon to select Properties. BEC 6800RUL User Manual...
  • Page 26 In the TCP/IPv6 properties window, select the Obtain an IPv6 address automatically Obtain Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration. BEC 6800RUL User Manual...

  • Page 27: Configuring Pc In Windows Vista (Ipv6)

    Center at the top bar. When the Network and Sharing Center window pops up, select and click Manage network connections on the left window pane. Select the Local Area Connection, and right click the icon to select Properties. BEC 6800RUL User Manual...
  • Page 28 Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration. BEC 6800RUL User Manual...

  • Page 29: Configuring Pc In Windows Xp (Ipv6)

    1. On the Desktop, Click Start > Run, type cmd, then press Enter key in the keyboard, the following screen appears. 2. Key in command ipv6 install Installation of IPv6 is now completed. Please test it to see if it works or not. . BEC 6800RUL User Manual...

  • Page 30: Default Settings

    Attention release it, to be sure you power cycle the device again. Device LAN IP Settings IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 DHCP Server: DHCP server is enabled. Start IP Address: 192.168.1.100 IP pool counts: 100 BEC 6800RUL User Manual...

  • Page 31: Chapter 4: Basic Configuration

    NOTE: This username / password may vary by different Internet Service Providers. Congratulations! You have successfully logged on to your BEC 6800RUL. Once you have logged on to your router via your web browser, you can begin to set it up according to your requirements.

  • Page 32: Status

    Operation: Current available operation. Connection: The current connection status. IP Address: WAN port IP address. Netmask: WAN port IP subnet mask. Gateway: The IP address of the default gateway. Primary DNS: The IP address of the primary DNS server. BEC 6800RUL User Manual...

  • Page 33: Quick Start

    Step 2 – WAN Click Continue to enter your SIM card inform for registration. Enter your SIM card telephone number, APN, Username, Password, PIN, etc. If you have trouble to find these information, please consult with your SIM carrier. BEC 6800RUL User Manual...
  • Page 34 Quick Start Wiazrd Note: when re-inserting the 3G / 4G SIM card to the BEC 6800RUL, you should again press Continue button to make 3G / 4G connection take effort, or you can Save Config and Restart the router to reach the same effort.

  • Page 35: Wan

    BEC 6800RUL now obtains a WAN IP address. When disabled, BEC 6800RUL is in router mode that it handles a WAN IP address and all features are become available. ISP Mode: A list of 3G / 4G service providers that is available.

  • Page 36: Chapter 5: Advanced Configuration

    The default username and password is “admin” and “admin” respectively for the Administrator account type. NOTE: This username / password may vary by different Internet Service Providers. Congratulations! You have successfully logged on to your BEC 6800RUL. BEC 6800RUL User Manual...
  • Page 37 Advanced Configuration / Login to GUI Once you have logged on to your BEC 6800RUL via your web browser, you can begin to set it up according to your requirements. On the configuration homepage, the left navigation panel links you...

  • Page 38: Status

    Software Version: Firmware version. MAC Address: The LAN MAC address. Port Status Port Status：Display available connection interfaces that are supported in the BEC 6800RUL. Users can look up the status of each interface. Port: List current available WAN connections. Operation: Current available operation.

  • Page 39: Mobile Status

    Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since system ready. Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system ready. Amount used: Show the traffic or hours has been used. BEC 6800RUL User Manual...

  • Page 40: Arp Table

    DHCP Server, for more information, turn to Page 63-64. MAC Address: The MAC Address of internal DHCP client host. Client Host Name: The Host Name of internal DHCP client. Register Information: Register time information. BEC 6800RUL User Manual...

  • Page 41: System Log

    Firewall Log entries. The log shows log entries when you have enabled Intrusion Detection or Block WAN PING in the Configuration / Firewall section of the interface. Please see the Firewall section of this manual for more details on how to enable Firewall logging. BEC 6800RUL User Manual...

  • Page 42: Upnp Portmap

    Name: the name of this UPnP mapping. Protocol: the protocol used by this mapping. External Port: the external service port the internal port mapped to. Internal Port: the internal service port. IP Address: the IP Address of the host in LAN. BEC 6800RUL User Manual...

  • Page 43: Quick Start

    Step 2 – WAN Click Continue to enter your SIM card inform for registration. Enter your SIM card telephone number, APN, Username, Password, PIN, etc. If you have trouble to find these information, please consult with your SIM carrier. BEC 6800RUL User Manual...
  • Page 44 Quick Start Wizard Note: when re-inserting the 3G / 4G SIM card to the BEC 6800RUL, you should again press Continue button to make 3G / 4G connection take effort, or you can Save Config and Restart the router to reach the same effort.

  • Page 45: Configuration

    ISP or remote node. In this case, an internal router is not required. IP Address: Specify an IP address on this virtual interface. Netmask: Specify a subnet mask on this virtual interface. BEC 6800RUL User Manual...

  • Page 46: Dhcp Server

    Apply to enable this function. If you check “Use Router as a DNS Server”, the 3G / 4G Router performs the domain name lookup, finds the IP address from the outside network automatically and forwards it back to the requesting PC in the LAN (your Local Area Network). BEC 6800RUL User Manual...
  • Page 47 If you check DHCP Relay and then you must enter the IP address of the DHCP server which assigns an IP address back to the DHCP client in the LAN. Use this function only if advised to do so by your network administrator or ISP. Click Apply to enable this function. BEC 6800RUL User Manual...

  • Page 48: Wan - Wide Area Network

    Card into to the built-in SIM slot in the BEC 6800RUL. IP Pass-through Mode: When enabled, BEC 6800RUL is in bridge mode that it does not obtain a WAN IP address; features such as routing capabilities, NAT, firewall, etc., are being disabled. The client router that is behind the BEC 6800RUL now obtains a WAN IP address.
  • Page 49 NOTE: If you are not familiar with these settings, please consult with ISP for further assistance or information. NOTE: After inserting your 3G/4G SIM card, please wait for 30 seconds before the dial-up connection process. If errors occur, please remove your SIM card or restarting your BEC 6800RUL router. BEC 6800RUL User Manual...
  • Page 50 Advanced Configuration / BEC 6800RUL User Manual...
  • Page 51 Only Download: Only make statistics of Download Traffic. Only Upload: Only make statistics of Upload Traffic. Download and Upload: Make statistics of both Download and Upload Traffic. Time-based Allow you to manually assign a billing period. BEC 6800RUL User Manual...
  • Page 52 Over usage allowance action: If the online time or traffic you have used exceeds the usage allowance you set. The system will do the followings operations. Save the statistics to ROM: Choose the time interval for saving statistics. You can choose to save for Every one hour or Disable the function. BEC 6800RUL User Manual...

  • Page 53: System

    SNTP server. To avoid unnecessarily increasing the load on your specified SNTP server you should keep the poll interval as high as possible – at the absolute minimum every few hours or even days. BEC 6800RUL User Manual...

  • Page 54: Firmware Upgrade

    Do not power down the router or interrupt the firmware upgrade while it is still in process. Improper operation may damage the router. If firmware upgrade failure occurs, please refer to operations below for emergency recovery. Warning BEC 6800RUL User Manual...
  • Page 55 Usually, if the device failed to upgrade successfully, the recovery page will automatically (or you enter 192.168.1.254 at the address bar) turn to the page showed as below, entering the recovery mode. Select the correct file used for upgrade, and press START. BEC 6800RUL User Manual...

  • Page 56: Backup / Restore

    If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default settings. BEC 6800RUL User Manual...

  • Page 57: User Management

    If at any time you forget this password, please press and hold the RESET button in the rear panel for more than 6 seconds then release it for router to restore to its factory default settings. BEC 6800RUL User Manual...

  • Page 58: Mail Alert

    3G / 4G overran allowance was detected. Alert Mail Time (Intrusion Detection): The time interval of sending Email. Recipient’s Email (Intrusion Detection): Enter the email address that will receive the alert message once intrusion has been detected. BEC 6800RUL User Manual...

  • Page 59: Firewall And Access Control

    Internet. Intrusion Detection: Enable Intrusion Detection to detect, prevent, and log malicious attacks. MAC Filter rules: Prevents unauthorized computers accessing the Internet. URL Filter: Blocks PCs on your local network from unwanted websites. BEC 6800RUL User Manual...

  • Page 60: Packet Filter

    Log: Choose “log” if you wish to generate logs when the filer rule is applied to a packet. Add: Click this button to add a new packet filter rule and the added rule will appear at the bottom table. Edit: Check the Rule No. you wish to edit, and then click “Edit”. BEC 6800RUL User Manual...
  • Page 61 IP address is assigned to a specific PC that is not allowed to access an outside resource such as the Internet. You configure the filtered IP Attention address manually for this PC, but it stays in the same subnet with the router. BEC 6800RUL User Manual...

  • Page 62: Mac Filter

    MAC Address: Enter the MAC addresses you wish to manage. Time Schedule: It is self-defined time period. You may specify a time schedule for your prioritization policy. For setup and detail, refer to Time Schedule section. BEC 6800RUL User Manual...

  • Page 63: Intrusion Detection

    Maximum ICMP Count: This is a threshold to decide whether an ICMP flood is occurring or not. Default value is 100 ICMP packets per seconds except ICMP Echo Requests (PING). Log: Check Log if you wish to generate logs when the filer rule is applied to the Intrusion Detection. BEC 6800RUL User Manual...

  • Page 64: Advanced Configuration

    Count (Default 100 c/sec) Max ICMP Count ICMP Flood (Default 100 c/sec) Max PING Count ICMP Echo (Default 15 c/sec) Src IP: Source IP Src Port: Source Port Dst Port: Destination Port Dst IP: Destination IP BEC 6800RUL User Manual...

  • Page 65: Block Wan Ping

    Note that the URL filter blocks web browser (HTTP) connection attempts using port 80 only. For example, the URL http://www.abc.com/abcde.html would be dropped since the keyword “abcde” occurs in the URL. BEC 6800RUL User Manual...
  • Page 66 Time Schedule: It is self-defined time period. You may specify a time schedule for your prioritization policy. For setup and detail, refer to Time Schedule section. Log: Click “Log” if you wish to generate logs when the filer rule is applied to the URL Filter. BEC 6800RUL User Manual...

  • Page 67: Qos - Quality Of Service

    QoS policy. So, you need to add a policy with LAN to WAN direction setting.  WAN to LAN: Control Traffic flow from the WAN to LAN. The connection maybe either issued from LAN to WAN or WAN to LAN.) BEC 6800RUL User Manual...
  • Page 68 DSCP Marking allows users to classify traffic based on DSCP value and send packets to next Router. NOTE: To be sure the router(s) in the backbones network have the capability in executing and checking the DSCP through-out the QoS network. BEC 6800RUL User Manual...
  • Page 69 So, you may specify which application can have higher priority to acquire the non-used bandwidth.  High  Normal: The default is normal priority.  For the sample priority assignment for different policies, it is served in a First-In-First-Out way. BEC 6800RUL User Manual...
  • Page 70 The figures below are a simple example to show the different settings for Web Browsing and Email sending to assure the bandwidth for these applications. For Web Browsing (HTTP) Here we guarantee 50% of the traffic for HTTP application. BEC 6800RUL User Manual...
  • Page 71 Here we guarantee 30% of the traffic for Mail application. Thus, 20% of LAN to WAN (upstream) traffic is reserved for other uses and those applications’ bandwidths are guaranteed. For downstream traffic bandwidth, just the direction changes and the configuration is similar. BEC 6800RUL User Manual...

  • Page 72: Virtual Server

    TFTP (Trivial File Transfer Protocol) World Wide Web HTTP POP3 (Post Office Protocol Version 3) NEWS (Network News Transfer Protocol) NTP (Network Time Protocol) SNMP TCP & UDP HTTPS 1503 T.120 1720 H.323 4000 7070 RealAudio BEC 6800RUL User Manual...

  • Page 73: Port Mapping

    (PC) with the IP address of 192.168.1.2. If the port is not listed as a predefined application, you need manually. In addition to specifying the port number used, you also need to specify the protocol used. The BEC 6800RUL User Manual...
  • Page 74 Most applications use TCP or UDP, however you can specify other protocols using the drop-down Protocol menu. Setting the protocol to “all” causes all incoming connection attempts using all protocols on all port numbers to be forwarded to the specified IP address. BEC 6800RUL User Manual...

  • Page 75: Dmz

    Add/Delete Except Ports 1. Enter except port number in the port field or choose from the drop down list. Select the port and describe the port. 2. Click Add. The new except port will display below. BEC 6800RUL User Manual...
  • Page 76 IP address that are issued by the DHCP server. You can configure the virtual server IP address manually, but it must still be in the same subnet as the router. BEC 6800RUL User Manual...

  • Page 77: Time Schedule

    Start Time: The default is set at 8:00 AM. You may specify the start time of the schedule. End Time: The default is set at 18:00 (6:00PM). You may specify the end time of the schedule. Select the Apply button to apply your changes. BEC 6800RUL User Manual...

  • Page 78: Advanced

    IP Address: Fill in the IP address of the host computer that is sending the data packet. MAC Address: Fill in the MAC address of the computer that the incoming data packets are to be forwarded. BEC 6800RUL User Manual...

  • Page 79: Dynamic Dns

    Period: Set the time period between updates, for the Router to exchange information with the DDNS server. In addition to updating periodically as per your settings, the router will perform an update when your dynamic IP address changes. BEC 6800RUL User Manual...

  • Page 80: Device Management

    Enable: Check to enable the router’s UPnP functionality. UPnP Port: The Default setting is 2800. It is highly recommended you use this port value. If this value conflicts with other ports already in use you may wish to change the port. BEC 6800RUL User Manual...
  • Page 81 Step 3: In the Communications window, select the Universal Plug and Play check box in the Components selection box. Step 4: Click OK to go back to the Add/Remove Programs Properties window. Click Next. Step 5: Restart the computer when prompted. BEC 6800RUL User Manual...
  • Page 82 Step 4: Select Networking Service in the Components selection box and click Details. Step 5: In the Networking Services window, select the Universal Plug and Play check box. Step 6: Click OK to go back to the Windows Optional Networking Component Wizard window and click Next. BEC 6800RUL User Manual...
  • Page 83 Advanced Configuration / Advanced BEC 6800RUL User Manual...
  • Page 84 Step 1: Click start and Control Panel. Double-click Network Connections. An icon displays under Internet Gateway. Step 2: Right-click the icon and select Properties. Step 3: In the Internet Connection Properties window, click Settings to see the port mappings that were automatically created. BEC 6800RUL User Manual...
  • Page 85 Step 4: You may edit or delete the port mappings or click Add to manually add port mappings. Step 5: Select Show icon in notification area when connected option and click OK. An icon displays in the system tray Step 6: Double-click on the icon to display your current Internet connection status. BEC 6800RUL User Manual...
  • Page 86 Step 3: Select My Network Places under Other Places. Step 4: An icon describing each UPnP-enabled device shows under Local Network. Step 5: Right-click on the icon of your BEC 6800RUL (4G_LTE OUTDOOR ROUTER) and select Invoke. The web configuration login screen displays.

  • Page 87: Sip_Alg

    - that is, it is forwarded to all ports. With IGMP snooping, multicast traffic of a group is only forwarded to ports that have members of that group.” BEC 6800RUL User Manual...

  • Page 88: Snmp Access Control

    The "c" comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm for "security", but is widely accepted as the SNMPv2 standard. SNMPv3 is a strong authentication mechanism, authorization with fine granularity for remote monitoring. Traps supported: Cold Start, Authentication Failure. BEC 6800RUL User Manual...
  • Page 89 From RFC 1472 (PPP/Security MIB):  PPP Security Group) From RFC 1473 (PPP/IP MIB):  PPP IP Group From RFC 1474 (PPP/Bridge MIB):  PPP Bridge Group From RFC1573 (IfMIB):  ifMIBObjects Group From RFC 1907 (SNMPv2): only snmpSetSerialNo OID BEC 6800RUL User Manual...

  • Page 90: Tr-069 Client

    ACS Username: Set the ACS user name for ACS authentication to the connection from CPE. ACS Password: Set the ACS server login password. Inform Period: Specify the inform interval time (sec) which CPE used to periodically send inform message to automatically connect to ACS. BEC 6800RUL User Manual...

  • Page 91: Remote Access

    Allowed Access IP Address Range Valid: Select Valid to allow remote management from these IP ranges. IP Address Range: Specify what IP address to be allowed to access device from remote side. Clink Add to insert management IP address list. BEC 6800RUL User Manual...

  • Page 92: Save Configuration To Flash

    After changing the router’s configuration settings, you must save all of the configuration parameters to FLASH to avoid losing them after turning off or resetting your router. Click “Save Config” and click “Apply” to write your new configuration to FLASH. BEC 6800RUL User Manual...

  • Page 93: Restart

    If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default settings. BEC 6800RUL User Manual...

  • Page 94: Logout

    3 minutes. You can modify this value using the Advanced / Device Management section of the web interface. Please see the Advanced section of this manual for more information. BEC 6800RUL User Manual...

  • Page 95: Chapter 6: Troubleshooting

    If the problem persists, most likely it is due to the malfunction of your hardware. Please contact your service provider or BEC for technical support. You have forgotten your login Try the default username "admin" and password username or password "admin".

  • Page 96: Recovery Procedures

    Please note that the router will only respond with its web interface at this address (192.168.1.1), and will not respond to ping request from your PC or other telnet operations. BEC 6800RUL User Manual...

  • Page 97: Appendix: Product Support & Contact

    If you come across any problems please contact the dealer from where you purchased your product. Contact BEC @ http://www.bectechnologies.net MAC OS is a registered Trademark of Apple Computer, Inc. Windows 7/98, Windows NT, Windows 2000, Windows ME, Windows XP and Windows Vista are registered BEC 6800RUL User Manual...
  • Page 98 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. V1.06.r18t.dc30 BEC 6800RUL User Manual...

Table of Contents