4G/Lte Status - BEC 4700A User Manual

Device Configuration
45
Status – 4G-LTE Status

4G/LTE Status

This page contains 4G/LTE connection information.
Status: Display current status of the 4G/LTE connection.
SIM Status: Identify current status of the SIM, Activate or SIM Card Not Found.
Signal Strength: The signal strength bar and dBm value indicates the current 4G/LTE signal strength.
The front panel 4G/LTE Signal Strength LED indicates the signal strength as well.
Network Name: The name of the LTE network the router is connecting to.
Cell ID: The ID of base station that the device is connected to.
Card IMEI: The unique identification number that is used to identify the 4G/LTE module.
Card IMSI: The international mobile subscriber identity used to uniquely identify the 4G/LTE module.
SIM Card Number (ICCID): It is a unique and specific serial number, consists of 19 or 20 characters,
assigned to your SIM card.
Network Mode: Display current network operating mode.
Network Band: Indicated the current radio frequency band used.
Auto Refresh: Select Disable or Enable to reload the mobile status information.
Refresh: Click to refresh the statistics.
Usage Allowance
>> click "Usage
To enable this feature, please go to Configuration >> Interface Setup >> Internet
Allowance" >> enable "Save the statistics to ROM"
BEC 4700A / 4700AZ User Manual