Configuring the PDU via the WEB utility
menu options
The following options are shown on the Configuration Utility main menu:
Setting the IP address
See setting the IP address under Configuring the PDU via serial (COM) port
Starting the web interface
To start the web interface, complete the following steps:
1. Start a web browser from a workstation or notebook computer and enter the IP
address of the PDU in the address field. The Connect to window is displayed.
(See Figure 30)
2. In the User name field, type Admin
3. In the Password field, type 00000000
4. Click OK. The main status page is displayed.
Note some local laws may require the user to enter a new password before
allowing web access. If a password reset is necessary, be sure to record the
password for later use.
© Copyright IBM Corporation 2020.
Figure 30 – WEB utility/Login
Customer Install Guide, PDU
53