Changing The Network Information; Changing The Network Configuration - IBM 3454-FCE Customer Install Manual

Figure 36 Setup SNMP Trap and SMTP Mail/Alert list

Changing the network information

Use the Network menu to change the network information for the PDU, for example, the
IP address. (See Figure 37)

Changing the network configuration

You can view or change the network configuration on the Network Configuration
window.
To view or change the network configuration of the PDU, complete the following steps:
1. From the main status page, in the left navigation pane, click Network/TCP/IP
2. Click "Info" to set the PDU IP address, gateway address, subnet mask, and
Domain Name System (DNS) address.
3. Click "Configuration" to configure TCP/IP settings.
© Copyright IBM Corporation 2020. Customer Install Guide, PDU 58