Changing Event Alerts - IBM 3454-FCE Customer Install Manual

Changing event alerts

You can change event alerts on the SNMP Trap Receivers window. (See Figure 36)
To configure the PDU to send e-mail or SNMP trap alerts to specified users when
specific events occur, complete the following steps:
1. From the main status page, in the left navigation pane, click Network/SNMP.
2. Click Trap Receivers to create a list of users or workstations that you want to
receive SNMP trap messages. You can specify the IP addresses of up to eight
trap receivers, the community information, type of trap, severity of trap, and
description of the events that cause the traps.
3. Click On Network/SMTP to create a list of up to four users that you want to alert.
© Copyright IBM Corporation 2020.
Figure 35 – Change Date Time
Customer Install Guide, PDU 57