Installing The Pdu In The Side Of A Rack (Alternate Method); Before You Begin; About This Task; Procedure - IBM 3454-FCE Customer Install Manual

Installing the PDU in the side of a rack (alternate method)

Before you begin

Tip Removing the rack doors and side panels makes installing the PDU easier.

About this task

To install the PDU model in a single EIA vertical mounting space in the side of the rack,
complete the following steps:

Procedure

1 Read the Rack safety
1. Align the vertical-mounting brackets (A) to the front of the PDU.
Make sure that you attach the brackets so that the power outlets face the rear of
the rack.
Figure 14. Aligning the vertical-mounting brackets to the front of the PDU. (PDU
picture for reference only, receptacle style may vary)
© Copyright IBM Corporation 2020.
notices, Pub # G229-9054 included with the unit.
Customer Install Guide, PDU 38