Adding A Battery Backup Module; Upgrading The Controller Firmware - Adaptec ICP5045BL User Manual

Dual Drive Failure Protection (RAID 6)—A RAID 6 array is similar to a RAID 5 array
●
except that it includes two independent sets of parity data instead of one.
Dual Drive Failure Protection (RAID 60
●
except that it includes four independent sets of parity data instead of two.

Adding a Battery Backup Module

This table shows the battery model supported by your ICP RAID controller.
RAID Controller
ICP5805BL/ICP5045BL/
ICP5085BL/ICP5125BR/ICP5165BR
ICP9085LI / ICP5085BR
ICP9047MA / ICP9087MA
ICP9014RO / ICP9024RO
To purchase a battery backup module, refer to the ICP Web site at
Adaptec Web site at www.adaptec.com.

Upgrading the Controller Firmware

To upgrade the firmware on your ICP RAID controller, follow the instructions in
Flash Utility on page
controller firmware, refer to the ICP Storage Manager User's Guide for Internal RAID Storage.
1
)—A RAID 60 array is similar to a RAID 50 array
Adaptec Battery Module 800
Adaptec Battery Module 600
Adaptec Battery Module 500
Adaptec Battery Module 400
103. You can also use the Adaptec Storage Manager to upgrade your
Chapter 3: About Your RAID Controller
Battery Model
www.icp-vortex.com
17
●
or the
Using the ICP