About The Icp9085Li - Adaptec ICP5045BL User Manual

About the ICP9085LI

The ICP9085LI is a SAS RAID controller with these features:
Mounting
bracket
1 external
SAS
connector
Form factor
Bus compatibility
PCI-X bus width
PCI-X bus speed
PHYs
Standard cache
Connectors
RAID levels
Simple Volume
Disk Drives
Maximum number of disk drives
Hot spares
Enclosure support
Automatic Failover
Onboard speaker
Audible alarm
Battery backup module
Chapter 3: About Your RAID Controller
Two 4-wide internal
SAS connectors
PCI-X connector
Diagnostic LED
Activity LED
Power LED
Back side of Controller
3/4 length
PCI-X, 3.3 V
64-bit
133 MHz
8
256 MB DDR2
One external 4x multilane (SFF-8470), Two internal 4x multilane
(SFF-8484)
0, 1, 1E, 10, 5, 5EE, 50,6, 60, JBOD
Yes
SATA, SATA II, SAS
8 (or up to 100 with expanders)
Yes
SES2
Yes
Yes with these specifications: 3.0 V, 90.0 mA. The internal
speaker is not required, as the onboard speaker volume is
appropriate for most environments.
Yes
Adaptec Battery Module 600 (sold separately—see
23
●
Charge LED
(for battery backup module)
Alarm connector
Mode 0 Flash connector
Activity LED connector
(top 2 left/right pins)
Battery connector
page 17)