arcconf getconfig
Lists information about the controllers, logical drives, and physical devices. This information
can include (but is not limited to) the following items:
Controller type
●
BIOS, boot block, device driver, and firmware versions
●
Logical drive status, RAID level, and size
●
Physical device type, device ID, presence of PFA
●
Physical device state
●
Enclosure information: fan, power supply, and temperature status
●
Syntax
ARCCONF CONFIG <Controller#> [AD/LD/PD/AL]
Parameters
Controller# is the controller number
AD/LD/PD/AL options:
AD—Adapter information only
●
LD—Logical drive information only
●
PD—Physical device information only
●
AL—All information (optional)
●
Example
ARCCONF GETCONFIG 1 AD
Chapter 2: Using the Command Line Utility
14
●