System Requirements; Installing The Slimscsi 1460 - Adaptec APA-1460 User Manual

Pc card-to-scsi adapter

Hide thumbs Also See for APA-1460:

Table of Contents

SlimSCSI 1460 Adapter User's Guide

System Requirements

Portable PC with a PC Card Type II, Type III, or Toshiba

Type IV slot

MS-DOS version 5.x or 6.x, Microsoft Windows 95,

Windows NT version 3.51 or 4.0, Windows 3.x, Windows for

Workgroups version 3.1 or 3.11, DR DOS, OS/2 version 2.x, or

OS/2 Warp

Follow these steps to install the SlimSCSI 1460 and connect your

SCSI devices to it:

Remove the SlimSCSI 1460 from its packaging.

Determine which of the two 50-pin cables you will use to con-

nect the SlimSCSI 1460 to your first (or only) SCSI device. To

do this, see which cable connector (high-density or low-

density) fits the SCSI connector on the back of the device.

Note:

If your SCSI device has a DB25 (25-pin) connec-

tor, you can order a free DB25 cable from Adaptec by

sending in the card included in this kit.

Table of Contents

1460b Slimscsi 1460