Character Entry - Sharp AQUOS R3 SH-04L Instruction Manual

Character entry

You can enter characters using the QWERTY keyboard, 10-key
keyboard, and voices.
z For details on switching the keyboard or input UI
"Setting character entry"
z When entering characters, touch [
screen to set the input software to use. The explanations are
based on the case when [S-Shoin] is set here.
Keyboard layouts
z You can use the following two types of the keyboards.
QWERTY You can enter a displayed character by
keyboard touching the character entry key. Use romaji
for entry.
10-key Several characters are assigned to one
keyboard character entry key. Enter characters by
flicking a character entry key up/down or to
the left/right.
z You can enter characters by touching a
character entry key until a character which
you want to enter is displayed.
☞
P. 51
] at the bottom of the
QWERTY keyboard
* Each key may be changed depending on the settings and the
condition.
1 Toolbar
z [ ]: Touch to scroll the toolbar.
z [ ]: Display the setting items for character entry.
y For details on the settings, refer to "Setting character entry"
☞
( P. 51).
z [ ]: Drag to adjust the position of the keyboard.
z [ ]: If you touch this and then drag the toolbar, you can
place the keyboard anywhere in the screen. If you touch [
and drag the bar left or right, you can adjust the transparency
of the keyboard. Touch [
original position.
z [ ]: Drag to adjust the size of the keyboard.
z [ ]: Touch to select and paste cut/copied items of history
and delete the history.
z [ ]: Enable voice input.
y For details on voice input, refer to "Inputting with voices"
☞
( P. 54).
49
10-key keyboard
] to return the keyboard to the
Before Using the Handset
]