Sharp AQUOS R3 SH-04L Instruction Manual page 29

Inserting and removing the docomo nano UIM card
„
and microSD Card tray
z Before inserting/removing the tray, make sure to turn off the
power. Hold the handset securely with your hand.
z Insert/remove the tray with the display side of the handset turned
up.
z The included SIM eject tool (sample) is required to remove the
tray.
When removing
1
Insert the tip of SIM eject tool into the docomo
nano UIM Card and microSD Card tray eject
hole
z Insert it horizontally until the card tray comes out. If you do
not insert it horizontally, may cause damage or malfunction.
2
Pull out the docomo nano UIM Card and
microSD Card tray from the handset
z Pull out the card tray slowly and horizontally.
Pulling out it forcefully or obliquely may cause damage.
z When pulling them out, take care that the card does not
come out of the card tray and get lost.
27
Contents/Precautions