Sharp AQUOS R3 SH-04L Instruction Manual page 148

Maps
You can measure your present location, use the navigation
function to check how to get to your destination in detail, etc.
z It is necessary to set [Location] to On to measure the present
☞
location ( P. 186 "Location").
1
In the home screen, select "Google"▶[Maps]
2
Use Maps
z To rotate the map: Keep a finger on the touch panel and turn
the map to the desired direction with another finger
z To display sterically: Slide up with your two fingers at the
same time
z To measure present location: [
Street View
„
1
In the Maps screen, touch and hold any place
2
Touch a displayed image
z To change a displayed direction: Slide the screen up/down or
to the left/right
z To move a displayed place: Touch the screen twice and slide
along the blue line
z To switch to the compass mode: [
z Some areas are not supported by Street View.
When the compass mode is used, the geomagnetic compass
z
of the handset and the direction displayed by Street View are
associated with each other.
]
]
Searching for routes
„
You can search for a route from a start point to an end point.
1
In the Maps screen, [GO]
2
Select how to get to the end point▶touch the
search box above
z The present location is entered while it is being measured.
3
Enter a start point
4
Touch the search box below
5
Enter an end point
z Follow the instructions on the screen after this step.
Searching for places nearby
„
You can search for places near a location on the map being
displayed.
1
In the Maps screen, touch the search box
2
Enter a name of place to search▶select a
search result
z When you enter the place, the entered place are searched
and displayed as a list.
3
Use the search result
146
Apps