Sharp AQUOS R3 SH-04L Instruction Manual page 167

5
Enter other items required by network operators
▶[
]▶[Save]
z Never set the MCC to a figure other than 440 or the MNC to
a figure other than 10. Otherwise the added access point
disappears from the screen.
If the settings of MCC and MNC are changed and the added
z
access point disappears from the screen, reset the settings or
set the access point manually.
Resetting an access point
„
Reset the access point settings to the default state.
1
In the home screen, select "apps
[Settings]▶[Network & Internet]▶[Mobile
network]▶[Advanced]▶[Access Point Names]
2
[ ]▶[Reset to default]
When sp-mode is not subscribed or if you fail to make
z
automatic setting of an access point due to signal status such
as outside the service area, you are required to set the access
point again manually.
Data usage
You can check the data usage volume via mobile networks or
Wi-Fi networks. Also, you can set limit.
1
2
folder"▶
165
In the home screen, select "apps
[Settings]▶[Network & Internet]▶[Data usage]
z The data communication volume via mobile networks is
displayed.
Select an item
Data Saver: Suppress the data usage volume by pausing
„
data transmission in the background of some apps.
y For apps whose data communication is not restricted even
during Data Saver, you can set it from [Unrestricted data].
„ Mobile data: Set whether to use the data communication via
mobile networks.
App data usage: Display the data usage volume via mobile
„
networks on a diagram. Also, you can check apps having
used data communication.
folder"▶
Handset Settings