Sharp AQUOS R3 SH-04L Instruction Manual page 150

z An alarm is not activated when the handset is turned off at the
set alarm time.
When the set alarm time arrives during a call, the other party's
z
voice and notification sound are heard at the same time.
Stopping an alarm
„
Activate an alarm tone or vibrator at the set alarm time.
1
Slide [ ] to [ ] while an alarm is ringing
z To use a snooze: slide [
Stopping an alarm while display is turned on
When the set alarm time arrives while a screen other than lock
screen of the touch panel is displayed, the alarm notification is
displayed. Stop the alarm by using the notification.
1
[DISMISS] while an alarm is ringing
z To use a snooze: [SNOOZE]
Adjusting an alarm volume
„
1
In the alarm screen, [
2
Adjust the volume in Alarm volume field
] to [ ]
]▶[Settings]
World clock
Display clocks for cities around the world.
1
In the home screen, select "apps
[Clock]▶[CLOCK]
2
[ ]
3
Select a city
Timer
Activate an alarm tone after the specified length of time
passes.
1
In the home screen, select "apps
[Clock]▶[TIMER]
2
Enter the time▶[
z To add 1 minute: [+1:00]
z To stop the countdown: [
z To reset the countdown: [RESET]
z The alarm sound is activated after the specified length of
time passes.
y To stop the alarm sound: [
z When the set time of timer arrives while the screen other
than lock screen of the touch panel is displayed, the alarm
notification is displayed. Stop the alarm by touching [STOP]
of the notification. Also, notify with the alarm in a minute after
touching [ADD 1 MIN].
148
folder"▶
folder"▶
]
]
]
Apps